EXPO KABEL LTD. in Tashkent

MG

TU 16-705.466-87

Non-insulated flexible copper wires are intended for use in electrical installations and devices.

KMO

TSH 64-05755737-132:2007

Copper wire rod (billet for drawing), designed for the manufacture of electrical wire for cables, wires, cords.

MF

GOST 2584-86

Wires made of copper and its alloys are intended for use in the overhead contact network, for the transmission of energy to electric transport.

APvP; APvPu; APvBP; APvBV; APvVng; APvBVng; APvVng-LS; APvBVng-LS; APvPng-HF

TSh 64-05755737-136:2008

Power cables with copper and aluminum conductive core with insulation from peroxide-crosslinked polyethylene for voltage 6, 10, 15, 20, 35 kV, are designed for the transmission of electrical energy in stationary installations with a nominal frequency of 50 Hz, for networks with grounded and insulated neutral..

M; A; AC

GOST 839-80

Non-insulated copper and aluminum wires are designed for the transmission of electrical energy in overhead electrical networks.

SBPu; SBZPu

GOST 6436-75

GOST R 51312-99

Cables for signaling and blocking, designed for electrical installations of railway signaling, centralization and blocking, fire alarm.

KSPP

TSh 64-05755737-131:2007

The high-frequency symmetrical single-four communication cable with polyethylene insulation and sheath is designed for inter-station communication lines of rural telephone networks, when they are sealed with digital systems with a transmission rate of up to 2048 kbit/s and a voltage of up to 350 V DC.

CCI; TPV; TPPep

TSH 64-05755737-125:2005

GOST P 51311-99

Urban telephone cables with polyethylene insulation in a plastic shell are designed for operation in local primary communication networks, with rated alternating voltage up to 225 and 145 V or constant voltage up to 315 and 200 V, respectively.

ZKP; ZKPm; ZKV; MKKSHP; MKKSHV

TU 16-505.233-96

High-frequency single-quarter communication cables with polyethylene insulation are designed for use on cable lines of zone communication transmission systems K-60 (for frequencies up to 250 kHz).

PRPPMok; PRPPM; PRPVM

TSH 64-05755737-128:2007

TSh 11.8-121:2005

Telephone and radio communication cables are single-pair, designed for fixed installation and operation in electrical networks with voltage up to 380 V AC frequency up to 10 kHz.

AKVVG; AKVVGE; AKVBBSHV; KVVG; KVVGE; KVBBSHV

GOST 1508-78

Control cables with aluminum or copper cores with plastic insulation in a polyvinyl chloride shell; with or without protective covers, designed for fixed connection to electrical appliances, apparatus, clamp assemblies of electrical switchgear voltage up to 660 V AC up to 100 Hz or up to 1000 V DC.

AVVG; AVVGz; APVG; AVBbShv; VVG; VVGz; PVG; VBBSHV

GOST 16442-80

Power cables with copper or aluminum cores; with plastic insulation, in a plastic shell; with or without protective covers, designed for transmission and distribution of electrical energy in stationary installations to networks with a voltage of 0.66 and 1 kV AC with a frequency of 50 Hz.

KGE; KGE-HL

TU 16.K73-02-88

Flexible power cables are designed to connect excavators and other mobile mechanisms or electrical installations to electrical networks with an isolated neutral, at a nominal AC voltage of 50 Hz, 6 kV main cores, auxiliary 380 V.

KG; KG-XL

TU 16.K73-05-93

TSH 64-05755737-129:2007

Flexible power cables (TU 16.K73-05-93), designed for connecting mobile mechanisms to electrical networks, at a nominal AC voltage of 660 V frequencies up to 400 Hz or a constant rated voltage of 1000 V.